Concord Extra Blog

Concord Extra Blog



Krud Kutter Rust Remover Trigger 946ml


krud kutter

Krud Kutter Rust Remover Trigger 946ml (£4.99)
 is unique get formula is ideal for vertical surfaces, and clings to the substrate to enable the rust removing crystals to attack and dissolve rust. It is water-Based, Biodegradable and Non-Flammable

Krud Kutter provides a clean surface free of contaminants, which  creates a secure bond for any primer, paint, coating, etc. and enhances the performance of the paint.

The proprietary (water-based) formulation penetrates into every void of a metal surface and dissolves rust/oxidation through chemical action. Then tiny, rust-inhibiting crystals are formed and become integral with the surface molecules of the metal to resist future rusting. It removes blueing on firearms instantly.

Always test first on an inconspicuous area. For best results apply in ambient temperature of 70F (21.11 C) or above. On metal, maintain wet solution on surface to remove rust. Once the rust is dissolved, rinse or wipe the surface, and wait one hour or more before painting. Do not allow remover to dry on painted surfaces. For improved paint adhesion on clean metal surfaces, dilute remover 50/50 with water, apply solution, and rinse or wipe the surface. To use as a rust inhibitor on unpainted metal, allow the remover to dry on the surface after the rust is dissolved. The remover will then protect bare metal against rust for up to 12 months. MFR will etch concrete and turn the surface white. Recommend covering concrete with a plastic drop cloth for protection.

Directions for Use:

Remove oil and grease from the metal to be treated. Rinse the metal to break the surface tension and wash away loose dirt. Apply the remover by brush, spray or by dipping. Use plastic, glass or stainless steel containers. Disassemble units composed of moveable parts before cleaning. Clean parts and allow drying before reassembling.